How much does radon mitigation cost in Pennsylvania?
Short answer
Usually about $800 to $1,200, according to DEP's fact sheet on mitigation systems. DEP's consumer guide gives a wider range of $500 to $2,000, with an average of about $1,000. Running the fan adds roughly $30 to over $100 a year.
The Pennsylvania Department of Environmental Protection (DEP) publishes two price ranges, and both are current:
- Its Radon Mitigation Systems fact sheet (revised March 2025) says most installations fall between $800 and $1,200. DEP's January 2026 Radon Action Month press release uses the same range.
- Its Consumer's Guide to Radon Reduction (revised March 2026) says the cost of fixing a home in Pennsylvania generally ranges from $500 to $2,000, with an average of $1,000.
Read them together: most jobs land near $1,000, and harder houses cost more.
What are you paying for?
Most systems are a pipe and a fan that pull radon from under the floor and vent it above the house. DEP-certified mitigators design and install them.
- Vent above the roof, so the gas spreads out outdoors.
- Fan in the attic or outside the house, not in the living space. It runs all the time.
- Pipe from the slab up through the house or along an outside wall.
- Gauge on the pipe shows that the fan is pulling air.
- Cracks and openings sealed, so the fan pulls from under the house.
- Suction pit under the slab, where soil gas with radon is drawn into the pipe.
What does it cost to run?
- Electricity: DEP says annual operating costs may be from $30 to over $100, depending on fan size and other factors.
- The fan: most radon fans have a five-year warranty and typically last much longer. DEP puts a replacement fan at about $250 to $350, including parts and labor.
What about new homes?
DEP says passive radon-resistant features usually cost $350 to $500 to add while a house is being built. If a house already has a passive system, a mitigator can add a vent fan for about $300.
How do you compare quotes?
- Check that the company and the person doing the work are DEP-certified. How to check.
- Ask what level they expect after the work and when it will be retested. DEP says to test no sooner than 24 hours after the system is turned on.
- Ask where the pipe and fan will go, and what the fan warranty covers.
- Get more than one quote.